Recron^© 3s has been designed and developed by Reliance Technology Centre for Asbestos Cement Industry, as reinforcement agent in Asbestos Cement Products such as sheets (for load bearing and flexural strength) and pipes (for bursting pressure and flexural strength).

To know more about Recron^© 3s in the asbestos industry, click below:

• Advantages
• Performance
• Specifications

• Recron^© 3s comes in two forms - straight and special crimped, unlike other man made fibres. Crimped fibre allows improved interlocking.
• Recron^© 3s disperses in water within seconds, thereby allowing uniformity in application & properties.
• Recron^© is produced in fine controlled dimension and gives very high matrix (6 to 7 times). Such fine fibre and dispersion ensures uniform three-dimensional micro-reinforcement.
• In construction industry, these fine fibres help the structure take up thermal expansion & contraction. In RCC and plastering, the fine fibre checks micro cracks. They are also used in cement premix.
• Recron^© 3s has excellent UV stability as compared to the PP fibre.
• The alkali stability of the fibre in the 2% cement slurry alkalinity shows excellent stability over a period of time.

Performance

In Asbestos Cement Pipes

• Improves drainage, fine retention
• Improved bursting load
• Increase in tensile strength
• Reduced breakage in handling and transit

In Asbestos Cement Sheets

• Improved plant maintenance (Straight fibre retains fines better)
• Clearer water ensures low load on pollution control system
• Cross-section of wet sheets display three-dimensional uniform spread of fibre during manufacturing, thereby confirming excellent interlocking
• Reduced breakage during manufacturing, in handling and storage
• Reduces breakage in transit & placement

Conditions:

All information supplied is in good faith as being typical of the product but no warranty is given or implied.