Process
Experience in Fire & Gas detection
system design, Material and Energy balance
calculations, Preparation and updation
of PFDs, UFDs, P&IDs, LDTs, Equipment
list, Cause & Effect diagrams, Complex
loop descriptions,tie-ins, process data
sheets for equipments, machinery and instruments,
Hydraulic calculations, Relief system
calculations, HAZOP studies and Vendor
document review.
Plant Layout & Piping
Experience in front end, conceptual and
detail design of piping system to develop
Plot & Site plan, PDS based piping
layout and isometrics, stress analysis
and supports, Material specification &
MTO, review and approval of vendor details.
Piping Stress
Analysis
Experience in Stress Analysis well versed
with relevant software tools, preferably
in the areas of Oil, Gas & Hydrocarbons.
Instrumentation
Experience in selection and preparation
of data sheets of field instruments like
MOVs, Severe service control valves, Fiscal
Metering Systems, Analyzers Systems for
Liquid, Moisture, NIR, Gas Chromatograph
etc, Automatic Tank gauging systems, Specialty
flow meters & selection of DCS / ESD
/ F&G / Machine Monitoring Systems.
Preparation of deliverables like I/O List,
Cause & Effect, Complex and advanced
loop control design and review of the
vendor documents. Development of location
drawings for Inst / F&G, Control Room
drawings, etc. Hands on experience on
using INTools V7.0 and Field Bus Engineering
design of DCS Systems are a pre requisite.
Electrical
Experience in design of electrical system,
power, lighting, earthing design, single
line diagram, short circuit study, protection
system, relay setting, equipment selection,
procurement & inspection of electrical
equipments. Knowledge of International
and local codes and standards is essential.
Civil
Architect
Experience in designing of Industrial
/ non-plant buildings, generate specifications,
MTOs, tender documents, making presentations
to the clients. Knowledge of Microstation
and architectural presentation software
(3D Max and Photoshop) is desirable.
Structural
Experience in analysis/design/detailing
of RCC and Steel structures for wind,
seismic and other loads as per Indian
and international codes. The job responsibility
includes thoroughly preparing / reviewing
/checking the design documents including
STAAD input files. Proficiency in STAAD
Pro is necessary.
Underground
Experience in development of plot plans,
plant grading work details, drainage and
underground service calculations, design
and engineering of storm water. drainage
and underground services including oily
water sewer system, preferably for Refinery
and Petrochemical Plants. Knowledge of
software like Inroads, Microdrainage etc.
is desirable.
Mechanical
Static Equipment
Experience in design of Pressure Vessels,
Columns, Reactors, Heat Exchangers, Air
Coolers, Spheres and Storage tanks and
familiarity with all international codes
/ standards. Knowledge of relevant software
like Compress, B-Jac is essential.
Rotary Equipment
& Mechanical Packages
Experience in design of Compressor, Pumps
and Packages (Desalination unit, Nitrogen,
Cooling towers, DM plant, Flare systems
etc.) and familiarity with all international
codes / standards.
Heat Exchanger
Specialist
Experience in thermal design of heat transfer
equipment like Reformers, Fired heaters,
Exchangers etc. and familiarity with all
international codes / standards. Knowledge
of tools like HTRI / HTFS is essential.
Specialization in fired-heaters with process
design background will be added advantage.
Material Handling
Experience in preparation of equipment
specification, layouts and system design
of pneumatic / bulk conveyor systems,
de-dusting systems in refinery / petrochemical
applications. Troubleshooting experience
for the above material handling systems
will be an added advantage.
HVAC Engineer
Experience in HVAC field doing review
studies, heat load calculations, sizing
& selection of equipments, preparation
of enquiry documents technical bid analysis,
detail engineering, duct design, etc for
industrial & commercial buildings.
Knowledge of Air Handling units, Air ventilation
units, chillers, chemical filters, and
precision Air conditioners is necessary.
Knowledge of software like Trace 700 is
desirable.
Project Engineering
Chemical or Mechanical engineers with
experience of working in a multi discipline
engineering consultancy organization,
carrying out execution of projects on
EPC or EPCM basis. Thorough knowledge
of interdiscipline co-ordination, planning
and monitoring of activities and progress
reporting is a must. Candidate should
be familiar with project control, monitoring
and reporting techniques. Exposure to
cost control and construction experience
at project sites would be an added advantage.
Project Planning & Control
Experience in developing summary and detailed
schedules for process plants using Primavera
(P3/P3e), Engineering Planning, Scheduling,
Resource planning, Earned Value Measurement
etc. Must be fully conversant with managing
databases in MS Access / MS Excel. Post
graduation in Project / Construction Management
will be an added advantage.
Positions are
based in Mumbai & Jamnagar.
Applicants should be
engineering graduates / post-graduates
in one of the above disciplines. Preference
will be given to those with experience
of working on Oil, Gas & Chemicals
projects as part of large design Engineering
Consultancy firms.
Appointments will be made in a Reliance
Group Company – operating in the
EPC Sector. Compensation will be commensurate
with the level and responsibility of the
assignment and match the best in the industry.
Company follows a Cost to Company method
of compensation offering substantial flexibility
to the selected candidate to choose his
compensation package based on his own
taxation and social needs. Interested
candidate may apply
online at www.ril.com with 10 days.
